9 10 Remove the green connector and slide open 11 Insert or splice the purple reverse cable from the interface onto PIN number 4 12 Remove the black connector and slide open 13 Insert the pink speedpulse cable from the interface in PIN number 56 14 Screw the screen support onto the pioneer unit using 6 flathead screws supplied with the unit 15 After installing the interface, slide the unit into the dashboard, routing the display cable underneath and tighten 4 small allen screws 16 Put the fascia in (make sure to connect the USB on the panel) and tighten with 2 screws Take the screen and install the metal support using the 2 middle screws Installation manual SPH-EVO82DAB-DUC | Version 1.0
Download PDF file