Installation Note English 2. Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place. Dashboard Installation 2. Tighten two screws on each side. Tapping screw (5 mm × 8 mm) English CD RDS RECEIVER AUTORADIO CD RDS SINTOLETTORE CD RDS REPRODUCTOR DE CD CON RECEPTOR RDS CD RDS-EMPFÄNGER CD RDS-ONTVANGER CD RDS ПРИЕМНИК DEH-4200SD DEH-3200UB • Check all connections and systems before final installation. • Do not use unauthorized parts. The use of unauthorized parts may cause malfunctions. • Consult with your dealer if installation requires drilling of holes or other modifications of the vehicle. • Do not install this unit where: — it may interfere with operation of the vehicle. — it may cause injury to a passenger as a result of a sudden stop. • The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet. • Optimum performance is obtained when the unit is installed at an angle of less than 60°. Mounting bracket Dashboard or Console Removing the unit Mounting sleeve 3. Install the unit as illustrated. Nut Firewall or metal support Metal strap 1. Extend top and bottom of the trim ring outwards to remove the trim ring. (When reattaching the trim ring, point the side with the groove down.) 60° Screw DIN front/rear-mount Trim ring • Releasing the front panel allows easier access to the trim ring. This unit can be properly installed either from “Front” (conventional DIN Front-mount) or “Rear” (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit chassis). For details, refer to the following installation methods. • Use commercially available parts when installing. Screw (M48) 2. Insert the supplied extraction keys into both sides of the unit until they click into place. • Make sure that the unit is installed securely in place. An unstable installation may cause skipping or other malfunctions. DIN Front-mount 3. Pull the unit out of the dashboard. Installation Manual Manuel d’installation Manuale d’installazione Manual de instalación Installationsanleitung Installatiehandleiding Руководство по установке Printed in Thailand Imprimé en Thaïlande 1. Insert the mounting sleeve into the dashboard. For installation in shallow spaces, use the supplied mounting sleeve. If there is enough space, use the mounting sleeve that came with the vehicle. DIN Rear-mount 1. Determine the appropriate position where the holes on the bracket and the side of the unit match. Fastening the front panel If you do not plan to detach the front panel, the front panel can be fastened with supplied screw. Screw <CRD4436-A/N> EW <KMINX> <09H00000>
Download PDF file